Technical Specifications

Maximum efficiency

98.90%

98.90%

European efficiency

98.70%

98.70%

Maximum input power

67,400 W

73,500 W

Maximum input voltage^a

1100 V

Operating voltage range^b

200–1000 V

Maximum input current (per MPPT)

22 A

Maximum short-circuit current (per MPPT)

30 A

Maximum SUN2000 backfeed current to the PV array

0 A

Minimum startup voltage

200 V

Full power MPPT voltage range

600–850 V

Rated input voltage

720 V

Number of inputs

12

Number of MPP trackers

6

Note a: The maximum input voltage is the upper threshold of the DC voltage. If the input voltage exceeds the threshold, the solar inverter may be damaged.

Note b: If the input voltage is beyond the operating voltage range, the solar inverter cannot work properly.

Rated active power

60 kW

65 kW

Maximum apparent power

66 kVA

72 kVA

Maximum active power (cosφ = 1)

66 kW (Can be set to 60 kW)

72 kW

Rated output voltage^a

277 V/480 V, 3W+(N) ^b+PE

277 V/480 V, 3W+PE

Rated output current

72.2 A

78.2 A

Adapted grid frequency

50 Hz/60 Hz

Maximum output current

79.4 A

86.7 A

Output voltage range^c

384–576 V

Power factor

0.8 leading … 0.8 lagging

Maximum total harmonic distortion (rated power)

< 3%

Note a: The rated output voltage is determined by Grid code, which can be set on the SUN2000 app, SmartLogger, or NetEco.

Note b: Choose whether to connect the neutral wire to the SUN2000-60KTL-M0 based on the application scenario. When it is used in the scenarios without neutral wires, set Output mode to Three-phase, three-wire. When it is used in the scenarios with neutral wires, set Output mode to Three-phase, four-wire.

Note c: When the Grid code for the SUN2000-60KTL-M0 is set to Mexico-MV480, and the SUN2000-60KTL-M0 is used for power generation in 440 V AC grid connection, you need to adjust the level-1 and level-2 undervoltage protection threshold to 384 V. The proper AC output voltage is within the range of 384–576 V.

Input DC switch

Supported

Anti-islanding protection

Supported

Output overcurrent protection

Supported

Input reverse polarity protection

Supported

PV string fault detection

Supported

DC surge protection

Type II

AC surge protection

Type II

Insulation resistance detection

Supported

Residual current monitoring unit (RCMU)

Supported

Overvoltage category

PV II/AC III

Display

LED indicator, Bluetooth module+app, USB data cable+app, and WLAN module+app

Communication networking mode

MBUS (PLC)/RS485

Dimensions (W x H x D)

1075 mm x 555 mm x 300 mm

Net weight

74 kg±1 kg

72 kg±1 kg

Operating temperature

–25°C to +60°C

Cooling mode

Natural convection

Highest operating altitude

4000 m

Humidity

0%–100% RH

Input terminal

Amphenol Helios H4

Output terminal

Cable gland+OT terminal

Ingress Protection Rating

IP65

Topology

Transformerless