Description

The Solar Charger PowMr 60A provided by Solar System Lebanon is the best way to have to regulate the charging of your solar battery.

Moreover, The Solar Charger PowMr 60A is able to regulate the electricity that gets to your battery. Thus, your solar battery will not overcharge and makes it last longer.

Additionally, the Solar Charger PowMr 60A has inbuilt protection from short-circuiting. Consequently, you can save money by changing a part of the device instead of buying a new one.

Furthermore, the Solar Charger PowMr 60A has a programmable display to program the absorption of voltage to your batteries.

Features of the Solar Charger PowMr 60A:

• First, the Solar Charger PowMr 60A uses 3-stage charging, constant current(MPPT), constant voltage(Absorption Voltage), floating charge Selectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
• Secondly, it has a soft start time ≤1S, Dynamic response, and recovery time 100us
• Moreover, it has a max efficiency ≥98.1%, PV utilization ≥99%
• In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals
• MULTIPLE ELECTRONIC PROTECTIONS
• Short-circuiting
• Reverse-current
• Overcharging protection
• Overload protection
• Over-discharging protection
• Reverse polarity protection

Technical Specifications of the Solar Charger PowMr 60A:

• 100% MPPT controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%
• Built-in DSP controller with high-performance automatic battery voltage detection 12V/24V/36V/48V
• Battery options: Lithium, Lifepo4, Li(NiCoMn)O2), Vented, Flooded, Sealed, Gel, NiCd battery.
• Dynamic large icon display PV and Battery status, working mode: Night mode, no charging, MPPT mode, Absorption mode, Floating mode, and troubleshooting prompts.
• TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.
• Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature
• User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording.
• Intelligence Fan-on temperature >45℃ and off < 40℃, Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use.
• Large four big buttons, easy to use, more conveniently.

Tips to use the Solar inverter:

1. Always connect the battery first!!! Make sure enough batteries’ voltage lets the controller recognize the right system voltage.
2. DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller! connect the Inverter directly to the battery
3. Ensures solar input voltage higher than 3V or more than batteries’ voltage and total input power in the range. if the input power is too low for max input power, it may appear to have been discontinued., the charging current almost is zero when the controller is floating charge.
4. Parameter Setting Rules Floating voltage > Low voltage reconnect > Low voltage discharge.
5. The solar controller will stop output when the battery is under 10.7V. The LCD will be blank when the battery is under 8V and it will re-output when the battery is up to 12.6V (adjustable).
6. Install the Charger controller to the battery as close as possible. Tighten the wire.
7. When the controller makes a buzzing sound It’s working hard to dissipate heat for your controller. Rest your heart, it will be stopped when the temperature returns to normal.
8. Remove all the debris around the controller ( leaving a space of approx. 5.91in ).

HHJ-60A Warming tips: Make sure the Voc of PV meets the requirement right. VOC is 1.5 times of Battery voltage will be the best efficiency.

Input specification of the solar inverter:

• 12V system: DC20V~DC80V
• 24V system: DC37V~DC105V
• 36V system: DC50V~DC160V
• 48V system: DC72V~DC160V
• The maximum PV input voltage (Voc): DC190V
• (The controller can’t work at this voltage of long duration that will break the controller. Please refer to the Input voltage from PV.)
• The maximum PV input power
• (The total power rated of PV can’t be over this watt that will break the controller.)
• 12V system (720W)
• 24V system (1440W)
• 36V system (2100W)
• 48V system (2800W)

Output specification of the solar inverter:

• Overcharging protection voltage:
• 12V system (15V)
• 24V system (30V)
• 36V system (45V)
• 48V system (60V)

Finally, Buying this Solar Charger PowMr 60A is the best way to have a steady supply of electricity to your home batteries all year round.

So call us today at Solar System Lebanon and allow our professional operators to help you make your house a beacon of light all year round.

Read more

Download Datasheet

Return to our Solar inverters

Additional information